How to maintain full height turnstile in winter?

full height turnstile

Last updated on: January 16th, 2024 18:02 pm

Maintenance Guide in Winter:

As the volume of foot traffic continues to rise, full height turnstiles have become indispensable in various settings for managing personnel entry and exit. To ensure their longevity, it’s crucial to pay attention to maintenance, especially during the winter months. In this brief guide, Mairsturnstile, a leading full height turnstile manufacturer, will walk you through essential maintenance practices.

Even the most exceptional equipment can develop mechanical issues over time. Timely maintenance is essential to reduce shortcomings, save costs, and extend the service life of the equipment. Manufacturers, recognizing diverse customer requirements, should offer comprehensive repair and maintenance plans to address varied needs.

We must emphasize the importance of winter maintenance for these full height turnstiles. Neglecting proper winter care can directly impact the gate’s service life. Regular maintenance is crucial, treating a full height turnstile gate akin to a vehicle that requires quarterly check-ups.

Maintenance Process: To ensure optimal functioning during winter, pay attention to the following key points:

Core Maintenance:

Open the top cover to access the core and control board.

Monthly maintenance includes dust removal, cleaning of transmission parts, and lubrication with butter or high-concentration oil.

Check fasteners for tightness, replace worn parts, and maintain a proper gap between positioning arms and discs.

Clean the solenoid valve core and ensure proper installation.

Heating Part Maintenance:

Check if the heater can operate below 0°C.

Adjust wiring modes for extreme cold weather to ensure efficient heating.

In normal weather, revert to the original wiring to prevent overheating.

Circuit Part Maintenance:

Cut off power before conducting maintenance to prevent short circuits.

Inspect electronic control components for any issues and replace faulty parts.

Check power supply for exposed areas, bandage, wire arrangement, and aging, replacing any problematic components.

External Maintenance:

Clean the stainless steel appearance weekly or bi-weekly.

Remove rust spots, polish with talc powder, and apply anti-rust oil.

Allow 3-5 hours for the anti-rust oil to dry naturally before any contact.

It’s crucial to assign specialized personnel, particularly for electronic control maintenance, ensuring a deep understanding of the control principles for effective post-operation. Regular and thorough maintenance guarantees the optimal performance and prolonged service life of full height turnstile gates.

full height turnstile installation

Routine Maintenance Guide:

1. Mechanism Maintenance:

Regular Cleaning: Dust, dirt, or debris can accumulate in the mechanism over time. Regularly clean the rotating rods, bearings, and other moving parts. Use a soft brush or cloth to remove any accumulated dirt.

Lubrication: Apply lubricant to the moving parts of the full height turnstile to ensure smooth operation. Lubricate the bearings, hinges, and any other components that require lubrication. Be sure to use the recommended lubricants specified in the user manual.

Inspection: Periodically inspect the entire mechanism for any signs of wear, damage, or loose components. Check for any unusual sounds during the operation, as they may indicate potential issues.

Adjustments: If necessary, make adjustments to ensure that the rotating rods and other components are properly aligned. This helps prevent excessive wear and ensures optimal performance.

2. Circuit Part Maintenance:

Check Wiring Connections: Inspect the wiring connections to ensure they are secure. Loose or damaged wiring can lead to malfunctions. If any issues are detected, address them promptly.

Inspect Control Boards: Regularly inspect the control boards for signs of damage, corrosion, or loose components. Ensure that the control boards are functioning correctly. If there are issues, consult the user manual for troubleshooting steps.

Test Sensors and Detectors: If your full height turnstile is equipped with sensors or detectors, test them regularly to ensure they are detecting movements accurately. Clean sensors as needed.

3. External Maintenance:

Clean External Surfaces: Clean the external surfaces of the full height turnstile, including the stainless steel body and glass panels. Use a mild detergent and a soft cloth to remove fingerprints, dirt, or other stains.

Inspect Housing: Check the housing for any signs of damage, rust, or corrosion. If there are areas showing wear, consider repainting or applying a protective coating.

Verify Access Control Devices: If the turnstile is integrated with access control devices such as card readers or biometric systems, ensure they are functioning correctly. Test access control features regularly.

General Tips:

Follow Manufacturer’s Guidelines: Adhere to the maintenance guidelines provided by the manufacturer. The user manual typically includes detailed instructions for maintenance procedures.

Regular Maintenance Schedule: Establish a regular maintenance schedule. Perform routine checks and maintenance tasks quarterly or as recommended by the manufacturer.

Professional Service: If you encounter complex issues or malfunctions, it’s advisable to seek professional service. Manufacturers often provide technical support or have authorized service providers.

By following these maintenance practices, you can extend the lifespan of your full height turnstile and ensure its continued reliability and performance.

full height turnstile

Full Height Turnstile Maintenance Tips:

In addition to full height turnstiles, proper installation measures, such as covering the bottom with rubber or waterproof paper, are essential for tripod turnstile gates, swing turnstile gates, flap barrier gates, and similar installations. This precaution prevents the infiltration of water vapor, significantly enhancing the longevity of turnstile doors.

Similar to daily necessities like cars, computers, and air conditioners, turnstile gates require regular maintenance. Effective maintenance not only extends the service life of the turnstile gate but also serves as a crucial preventive measure against daily breakdowns. Here are some precautions for the daily maintenance of pedestrian turnstile gates:

Traffic Flow Management:

Strictly prohibit squeezing, braking rod, valve, or push of swing arm during card reading (swiping, fingerprints, etc.) until the traffic lights turn green to ensure the normal operation of the equipment.

Avoiding Unnecessary Pressure:

When turnstile gate equipment is not in use, refrain from sitting or leaning on the wing or rod to prevent unnecessary damage.

Environmental Considerations:

Avoid using the equipment directly in open-air or corrosive/wet environments to prevent damage from rain, moisture, or corrosive substances. For outdoor use, consider providing rain shelters, such as solar sheds.

Prompt Passage:

Pass through the turnstile gate promptly and avoid lingering in the working area of the gate.

Power-off Safety:

During power-off situations, personnel should not be in the working area to prevent potential harm from falling levers or sudden swing arm movements.

Lightning Precaution:

Avoid using outdoor turnstile gates during lightning to prevent damage to the equipment.

Grounding and System Connection:

Ensure a reliable system connection and protect the ground wire to prevent personal injury and accidents.

Equipment Cleaning:

The equipment body, made of SUS304 stainless steel, should be cleaned with a soft fabric to maintain a clean and bright appearance. Avoid using hard objects for scrubbing to prevent scratches, and refrain from water flushing to avoid electrical control system short circuits and equipment damage.

Moving Parts Inspection:

Regularly check the connection of moving parts. Tighten loose nuts, screws, and fasteners promptly to prevent gate failure from prolonged operation.

Secure Ground Connection:

Regularly check and ensure a secure ground connection for the system to maintain reliability.

Connector and Connection Points Check:

Regularly inspect connectors and points of connection to ensure a reliable electrical connection.

By following these precautions, you can ensure the optimal performance and longevity of various turnstile gates while minimizing the risk of malfunctions and damages.

full height turnstiles

Above is how to maintain the full height turnstile gate in winter and the maintenance tips from Mairs. If you do not understand any point about the maintenance, please contact us to communicate and discuss it together. I hope you can maintain the turnstile gate very well after reading this article.

Mairs provides high-quality full height turnstiles and service. We can also customize the full-height turnstile gate according to your requirements. We aim to provide a high-quality turnstile gate and the best service. All of our products get 2 years warranty. If there is an exception or technical support during the use of the turnstile gate, please contact Mairsturnstile, We will offer you the most satisfactory reply and provide the best service.

Sharing this: