How to use turnstile?

how to use turnstile

Last updated on: January 10th, 2024 19:23 pm

How to use turnstile?

Many people don’t know how to use turnstile gate or how to maintain it after they buy the turnstile gate. This may cause more injuries and failures. Let’s talk about how to use turnstile. How to use turnstiles in our daily lives?

Using a turnstile gate involves passing through a turnstile or blocking barrier, typically in controlled access areas. The exact steps may vary slightly based on the types of turnstiles, but the general process is as follows:

Approach the Turnstile:

Walk towards the turnstile gate or barrier.

Authentication:

Depending on the type of turnstile, you may need to authenticate yourself. Common methods include:

Access Card or Key: Hold your access card or key near the card reader or swipe it through the designated slot.

Biometric Recognition: For systems with biometric features like fingerprint or facial recognition, follow the system’s instructions for specific biometric authentication.

Wait for Authorization:

After authentication, wait for the turnstile to grant access. This may involve a turnstile gate opening, a revolving arm unlocking, or a similar turnstile mechanism depending on the turnstile design.

Pass-Through:

Once authorized, proceed to pass through the open gate or turnstile. Some turnstiles may have a directional indicator to guide your movement.

Automatic Closure:

After you pass through, the turnstile may automatically close to prevent unauthorized access. In some cases, it may require manual resetting.

Exit or Proceed:

If you are entering a controlled area, continue to your destination. If you are exiting, follow the designated path to leave the controlled area.

It’s important to note that turnstile systems can vary widely. Some may be simple waist-high gates, while others may be full-height turnstiles or revolving doors. The specific instructions for use will depend on the particular turnstile system installed at a given location. Always follow any posted instructions or guidelines to ensure smooth and secure access.

The usage instructions for a turnstile can vary based on the specific type and features of the turnstile gate. However, here are some general guidelines on how to use different types of turnstiles:

Turnstile gate with card reader:

Approach the turnstile gate.

Swipe or tap the authorized ID or IC card on the card reader.

Wait for the gate to open, indicated by a green light or arrow.

Pass through the open gate.

swing turnstile

QR Code Turnstile:

Stand in front of the QR code scanning area.

Present the authorized QR code to the scanner.

Wait for verification and gate opening.

Pass through the open gate.

Face Recognition Turnstile:

Look at the camera on the turnstile gate.

Wait for the face recognition system to verify your identity.

When successful, the gate will open, indicated by a green light or arrow.

Pass through the open gate.

Automatic Ticketing Turnstile:

Verify your ticket and ID card at the first gate.

Proceed to the second gate, where a camera captures your face.

Wait for successful face recognition and gate opening.

Pass through the open gate.

Fingerprint Turnstile:

Input your fingerprints in the designated identification area.

In some cases, it may be used in combination with a card swipe.

Wait for verification and gate opening.

Pass through the open gate.

Always follow any posted instructions or guidelines specific to the turnstile system you are using. Additionally, it’s crucial to be cautious and not attempt to force your way through the turnstile without proper authentication, as this may lead to malfunctions or injuries.

If there are any issues or questions about the turnstile gate, it’s advisable to contact the relevant personnel or customer support for assistance. Safety and proper usage are key considerations when using turnstile gates in various environments.

Precaution for using turnstile:

How to use turnstile? The use of pedestrian turnstile gates is very simple, we do not need to talk too much about it. We should pay attention to the use of turnstile gates. We focus on the precautions during the use of the turnstile gates.

When using the turnstile gate, the following precautions should be taken to ensure smooth and safe passage and system operation:

Identity verification preparation:

Before approaching the gate, ensure that the required authentication methods are prepared, such as swiping cards, sensing cards, fingerprints, or facial recognition. Ensure that relevant identification documents or cards are in a usable state.

Standing in the center:

During identity verification, stand in the center of the channel to ensure that the body can be effectively recognized by the system. Do not stand on one side or edge of the channel to avoid affecting the recognition effect.
Sequential passage: In general, the principle of single-person passage is followed to ensure that each user passes through after identity verification. Avoid multiple people squeezing or attempting to pass at the same time to ensure the normal operation of the system.

Avoid damaging equipment:

Do not intentionally damage or forcibly open the gate to avoid damage to the equipment. If there are any problems or abnormal situations, you should report to the device administrator or request assistance.

Do not force entry:

If authentication fails or the system issues an alarm, do not force entry into the channel. In abnormal situations, corresponding actions should be taken according to the system prompts, and authentication may need to be re-performed.

Carrying a valid card or identification:

When using a gate that requires card swiping, make sure to carry a valid card or identification. Avoid using expired, damaged, or lost cards.

why use turnstiles

Emergency opening:

In case of emergency, if emergency evacuation or passage is required, the emergency opening function of the gate should be known, and it can be opened according to the emergency button on the equipment or other specified methods.

Comply with the prescribed direction of passage:

Some gates have designated directions of passage, such as one-way passage or designated entrances and exits. Users should operate in the direction specified by the device.

Comply with usage regulations:

Follow usage regulations and management guidance, and do not violate relevant regulations. In special occasions, it may be necessary to follow specific passage procedures.

Regular maintenance and inspection:

Regular maintenance and inspection of equipment are carried out by professional personnel to ensure the normal operation of the gate equipment. Do not disassemble or adjust the equipment without authorization.

Carry the card with you:

If a regular identity verification card is required, it is recommended to carry it with you to avoid frequent forgetting or loss.

Card Reading (Brushing Teeth, Fingerprinting, etc.):

Strictly avoid squeezing and pushing the turnstile gate before the traffic lights turn green.

Do not lean on or sit on the wing of the swing arm when the equipment is not in use.

Environmental Considerations:

Do not use the equipment in open-air or humid environments with corrosive substances.

Equip outdoor turnstiles with rainproof facilities.

Passing Through the Gate:

Pass through the gate quickly; do not linger in the working area.

Avoid staying in the working area when the gate is powered off.

Lightning Precautions:

Avoid using outdoor gates during lightning to prevent damage.

Safety and Grounding:

Ensure reliable connection of the system protection ground wire to prevent accidents.

Regularly check the connection of the system protection ground wire.

Maintenance and Cleaning:

Clean the turnstile gate regularly with a soft fabric to maintain appearance.

Avoid using hard objects or water for cleaning to prevent damage to the electrical control systems.

Regular Inspection:

Regularly check the connection of moving parts, fasteners, and system protection ground wire.

Ensure reliable connection of connectors and wiring points.

Anti-Electromagnetic Interference:

Consider a distance of more than 30cm between the card reader and the strong current power supply.

Access Controller Debugging:

Debug the access controller and system software for proper functionality.

Passage Operation:

Hold the card correctly during card reading, parallel to the sensing area.

Pass through the gate promptly after it opens.

Emergency Evacuation:

Ensure the turnstile gate remains open during emergency evacuations.

Pedestrian Behavior:

Pedestrians should not stay in the passage after entering.

Maintain a certain distance between pedestrians.

Recommendations for Outdoor Use:

Use outdoor turnstiles for open, humid, or corrosive environments.

If an indoor turnstile is used outdoors, purchase outdoor-specific turnstiles.

General Recommendations:

Do not collide with the gate panel when closed to prevent wear and damage.

Follow specific instructions for different turnstile types.

Contact the manufacturer for maintenance or technical support.

These precautions are essential for ensuring the safe and effective operation of turnstile gates and preventing damage or accidents.

The above precautions are based on general gate usage scenarios, and the specific situation may vary depending on the type and purpose of the equipment. During use, users should carefully read the relevant user manual and follow the guidance of the device administrator to ensure safe and orderly passage.

how to use turnstile

Finally, we talk about turnstile gate maintenance, all items should be maintained under the condition of frequent use, and so should the turnstile gate. It is not omnipotent. It is necessary to clean the dust inside and outside the chassis on time and regularly to ensure the normal operation of the equipment. Tidiness and lubrication: check whether the inside of the gate is clean, and remove the dust and other dirt. Check whether the action parts are astringent and carry out the necessary lubrication. For more details, please check our another article: turnstile maintenance

Sharing this: